Sun | Sun Blade 1000 Workstation

Introduced in October of 2000, the Sun Blade 1000 Workstation uses one or two 600 MHz, 750 MHz, or 900 MHz CPU modules, up to 8 GB RAM, and up to 2 ea. 18GB, 36GB or 73GB fiber channel disk drives.

The Sun Blade 1000 used the same system board, CPU modules, memory, and disk drives that were used in the Sun Fire 280R and the Netra 20.

The Sun Blade 1000 was EOL'd (end-of-lifed) in September of 2002 and replaced by the Sun Blade 2000.
Architecture: Superscalar SPARC v9
CPU Type: UltraSPARC III
MHz/Mb of CPU: 750MHz/8MB
900MHz/8MB
Max No. of CPUs: 2
Max Memory: 8 GB
Memory Slots: 8 (banks of 4)
DIMM Sizes: 128/256/512 MB or 1 GB
Max Int Disks: 2 x FC-AL
Disk Drive Height: 1" Hot Plug
I/O Bus: PCI
I/O Slots: 4
On-Board Ethernet: 10/100 Ethernet
Onboard SCSI Host: 2 x UltraSCSI
Onboard FC-AL Host: Yes, Copper
Max No. of Power Supplies: 1
Removable Media Slots: 2
Internal DVD-ROM: Standard
DVD10 (40x)
Internal Tape Backup: Optional
Small Medium Large
UltraSPARC III Cu Processor 1 @ 750 MHz 2 @ 750 MHz 2 @ 900 MHz
External Cache per Processor 8 MB 8 MB 8 MB
Graphics Accelerator Sun PGX32 Sun PGX64 Sun PGX64
Memory 1 GB (4 @ 256 MB DIMMS) 1 GB (4 @ 256 MB DIMMS) 2 GB (8 @ 256 MB DIMMS)
10K RPM FC-AL Disk Drive 1 @ 36 GB 1 @ 36 GB 1 @ 73 GB
Ethernet Port 1 @ 10/100BASE-T 1 @ 10/100BASE-T 1 @ 10/100BASE-T
USB Port 4 4 4
IEEE 1394 Port 2 2 2
Serial Port 2 2 2
Parallel Port 1 1 1
64-Bit PCI I/O Slot 3 @ 33 MHz
1 @ 66 MHz
3 @ 33 MHz
1 @ 66 MHz
3 @ 33 MHz
1 @ 66 MHz
Solar Price $740 $810 CALL


The above configurations can be customized to your specifications; to purchase any equipment on this site call 800-253-5764 or send an instant email.
Back to top